Elements
Do not assemble the Elements until you have defined how they fit into your model.
CAMERA
Live streaming onboard camera for a “Dynamic” model. You can visualize its footage on your app screen while driving. Camera as a whole (lens+flex circuit+electronic board) is connected to the Module (daughterboard) by a 5 strand cable.
- Link Cable orientation (red strand = positioning hole side)
- Do not bend the flex circuit too sharply
- Hold the assembly in position
ANGLE GEAR BOX
Set of a Motor (speed adjustable from 0 to 150 rpm through App) and plastic parts (Case, Shaft, Bearings and Bevel Gears) allowing to transmit the movement perpendicularly to the motor axis.
Example of use: vehicle propulsion
- Make sure that the Half-Shafts are tightly glued together
- Clearance between Bearings and Shaft + neutral grease
- Red wire on Bevel Gear side
- For tracked vehicles, Bevel Gear side towards sprockets
- Reinforcement Tubes might be fitted directly to the model
SMALL MOTOR
Set of a small Motor (speed adjustable from 0 to 2500 rpm through App) and plastic parts (Case and Joint Tube) ensuring its integration into the model.
Examples of use: propeller of a plane or a ship
- Do not force the Joint Tube onto the motor shaft
MODULE
Set of Motherboard+Daughterboard (with plastic case), Switch and Micro-USB (female socket) to transmit commands to the Elements.
Switch (toggle switch) allows to turn Module on and off.
Switch (toggle switch) allows to turn Module on and off.
Micro-USB receives a micro-USB cable for power supply or battery charging.
- Spacer to be cut out and kept
- No glue on PCB tracks
- Switch: white wire side = On / black wire side = Off
LARGE MOTOR
Set of a Motor (speed adjustable from 0 to 50 rpm through app) and plastic parts (housing+drive plate) allowing its installation into the model
Examples of use: rotation of an armored turret
- Do not glue or force the Drive Plate onto the motor shaft
SERVO
Set of a Servomotor with controlled angular displacement (from 0° to 180°) in stepper or linear mode (amplitude of movement adjustable through App) and plastic parts (Actuator and Actuator Plate)
Examples of use: up-and-down movement of tank gun, door opening, steering rod of truck
- Actuator Plate to be cut to fit the model
OPTICAL FIBER
Glued to the drop of an LED, this item extends its light and provides a light source in thin parts of your model.
Examples of use: aircraft navigation lights
- Place the Support with Optical Fiber on the light point of the LED
